Questions, answered straight.

Yes. Copperjack Electrical is a licensed WA electrical contractor (licence EC 00000), fully insured. Every job is left certified and compliant to the AS/NZS 3000 wiring rules.

Yes. Every job comes with a 12-month workmanship guarantee, on top of the manufacturer warranties on any parts we supply. If something we have installed is not right, we come back and make it right. And the work is left tested and certified to AS/NZS 3000.

Yes. Where the work requires it, every job is finished with an electrical compliance certificate, tested to AS/NZS 3000 and lodged where the work needs one. It is your proof the work is safe and certified.

Safety switches (RCDs) are required on power and lighting circuits in modern WA homes, and are strongly recommended everywhere. If your switchboard does not have them, we can add RCD protection and test it to AS/NZS 3000.

We give a clear quote before starting so there are no surprises. Send a few details through the form or give us a call and we will talk through the job and the price.

Because we do. A 4.9-star rating across 87 jobs comes from showing up when we say we will, doing it once, and leaving the place tidy. That's the whole job.

As a guide, licensed electricians around Perth typically charge $90–$140 an hour, with most small jobs falling in a predictable range. We give you a clear, fixed price before we start rather than an open-ended hourly rate. See our pricing guide for typical figures.

We talk through the job and the price upfront before any work begins, so you are never surprised by the bill. After-hours and genuine emergency call-outs are charged at a higher rate. We tell you that before we head out, not after.

Yes, seven days a week. Power outages, tripping circuits, burning smells, exposed or sparking wiring. If it is unsafe, switch off the main at the meter box, keep clear, and call us.

Older fuse boards often lack safety switches (RCDs) and struggle with modern loads. We upgrade to a compliant, RCD-protected switchboard and explain the cost upfront before any work begins.

Yes. We assess your switchboard and load capacity, then install a dedicated, compliant circuit for your home EV charger.

Sometimes yes, sometimes it needs an upgrade first. We do a load assessment on your switchboard before quoting an EV charger, so the dedicated circuit we install is safe and compliant rather than overloading an old board.

We're based in Osborne Park and cover Perth's northern suburbs, from the coast to Joondalup and back in towards Yokine.

We handle everything behind the meter: switchboards, circuits, lighting and safety gear. If a job needs network-side work (the service line or the meter itself), we coordinate that with the network distributor so you are not left chasing two trades.

A circuit breaker protects your wiring from overload and short circuits. A safety switch (RCD) protects people: it cuts power in milliseconds when it detects current leaking to earth, which is what prevents a fatal shock. Good switchboards have both; an RCBO combines the two in one device.

Warning signs include cloth or rubber-insulated (VIR) cabling, frequent tripping, warm or discoloured power points, flickering lights and a fuse board that has never been upgraded. We can inspect and tell you honestly whether you need a full rewire, a partial one, or just a switchboard upgrade.